Issue: Machine Not Heating or functioning upon start (seeing rEL on left display)
Common Cause: Machine stuck in non-power mode (possibly from end user holding S/L and hitting start switch)
Resolution:
** Perform the non-heat mode start-up procedure again (or a factory reset if there have not been any changes to the default programming ) **
1) Turn power off with main power switch
2) Hold buttons S/L
3) While holding all 3 buttons, turn the power switch on
**you'll see Prt show on the screen**
4) Once you see Prt, release all 3 keys
5) Once all 3 keys are released, turn machine off with main power switch
6) You are now factory reset, turn power switch back on normally
** Factory reset is same as above, except Step #2 you hold S/L/XL **"
 |
|||
** If the above does not rectify this issue, please contact our team at Info@AscasoUSA.Com for further assistance **